Lenze E82xVxxxKxxxxx - Manual (Page 469)

DC−bus operation
Fuses and cable cross−sections
Mains supply
12
l
469 EDS82EV903−3.0
9300 vector Rated fuse current Cable cross−section
Fuse Circuit−breaker Laying system L1, L2, L3, PE
B2 C
Type [A] [A] [mm 2 ] [mm 2 ]
Mains 3/PE AC 400/500 V operation with mains choke/mains filter
EVF9321 − C10 1.5 1.0
EVF9322 − C10 1.5 1.0
EVF9323 16 C16 2.5 2.5
EVF9324 16 C16 2.5 2.5
EVF9325 20 C20 4.0 2.5
EVF9326 32 C32 − 6.0 1)
EVF9327 80 − − 25
EVF9328 80 − − 25
EVF9329 80 − − 25
EVF9330 160 − − 70
EVF9331 160 − − 70
EVF9332 250 − − 120
EVF9333 250 − − 120
1) Pin−end connector required, since a maximum cable cross−section of 4 mm 2 can be connected to the inverter.
9300 servo
inverter Rated fuse current Cable cross−section
Fuse Circuit−breaker Laying system L1, L2, L3, PE
B2 C
Type [A] [A] [mm 2 ] [mm 2 ]
Mains 3/PE AC 400/500 V operation with mains choke/mains filter
EVS9321 − C10 1.5 1.0
EVS9322 − C10 1.5 1.0
EVS9323 16 C16 2.5 2.5
EVS9324 16 C16 2.5 2.5
EVS9325 20 C20 4.0 2.5
EVS9326 32 C32 − 6.0 1)
EVS9327 80 − − 25
EVS9328 80 − − 25
EVS9329 80 − − 25
EVS9330 160 − − 70
EVS9331 250 − − 120
EVS9332 250 − − 120
1) Pin−end connector required, since a maximum cable cross−section of 4 mm 2 can be connected to the inverter.