Lenze E82xVxxxKxxxxx - Manual (Page 227)

Parameter setting
Parameter setting with E82ZBC keypad
Display elements and function keys
9
l
227 EDS82EV903 EN 3.0
4 Display parameter set
In mode
g
:
display of the parameter set activated via
the digital signal
Otherwise:
Display of the parameter set that is active
for changing Select the individual parameter sets in mode
m
in
function bar 2
5 Display of code number
6 Display of subcode number
7 Display of parameter value or fault indication
8 Function keys
Function Explanation
u Enable controller Terminal X3/28 must additionally be at HIGH level
s Inhibit drive controller (CINH) or quick stop
(QSP) Configuration in C0469
t Change function bar 1 « function bar 2
xw To right/left in active function bar The active function is framed
zy Increase/decrease value
change quickly: keep key pressed Only blinking values can be changed
v Save parameters when pis blinking
Confirmation by STOre in display