Dell POWEREDGE M1000E - Manual (Page 1032)

1032 Multicast Commands
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip pim ssm 239.0.10.0 255.255.255.0
ip pim spt-threshold
Use the ip pim spt-threshold command in Global Configuration mode to set
the multicast traffic threshold rate for the last-hop router to switch to the
shortest path on the router. Use the no form of this command to return the
threshold to its default value (0).
Syntax
ip pim spt-threshold spt-threshold
no ip pim spt-threshold
Parameter Description
Default Configuration
The default threshold is 0. This indicates that the multicast router should
always switch to the multicast source tree.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip pim spt-threshold 100
Parameter Description
spt-threshold The multicast traffic threshold rate in kilobytes per second.
Range : 0–2000 Kbps).
2CSPC4.XModular-SWUM200.book Page 1032 Thursday, March 10, 2011 11:18 AM