Show ip igmp-proxy interface, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual
Page 893: Command mode, User guidelines, Example
IGMP Proxy Commands
893
Proxy Start Frequency........................ 1
show ip igmp-proxy interface
Use the show ip igmp-proxy interface command in Privileged EXEC mode to
display a detailed list of the host interface status parameters. It displays status
parameters only when IGMP Proxy is enabled.
Syntax
show ip igmp-proxy interface
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example fails to display status parameters because IGMP Proxy
is not enabled.
console#show ip igmp-proxy interface
Interface Index................................ vlan13
Ver
Query Rcvd
Report Rcvd
Report Sent
Leave Rcvd
Leave Sent
-----------------------------------------------------------------
1
0
0
0
-----
-----
2
0
0
0
0
0
3
0
0
0
-----
-----
2CSPC4.XModular-SWUM200.book Page 893 Thursday, March 10, 2011 11:18 AM