Dell POWEREDGE M1000E - Manual (Page 76)

76 Command Groups
Loopback Interface
(IPv6)
Manages Loopback configurations.
Multicast (Mcast) Manages Multicasting on the system.
OSPF (IPv4) Manages shortest path operations.
OSPFv3 (IPv6) Manages IPv6 shortest path operations.
Router Discovery
Protocol (IPv4)
Manages router discovery operations.
Routing Information
Protocol (IPv4)
Configures RIP activities.
Tunnel Interface (IPv6) Managing tunneling operations.
Virtual Router
Redundancy (IPv4)
Controls virtual LAN routing.
Virtual Router
Redundancy (IPv4)
Manages router redundancy on the system.
Utility Commands
Auto-Install
Automatically configures switch when a configuration file
is not found.
Captive Portal Blocks clients from accessing network until user
verification is established.
Clock Configures the system clock.
Command Line
Configuration Scripting
Manages the switch configuration files.
Denial of Service Provides several Denial of Service options.
Line Configures the console, SSH, and remote Telnet
connection.
Management ACL Configures and displays management access-list
information.
Password Management Provides password management.
PHY Diagnostics Diagnoses and displays the interface status.
Table 1-1. System Command Groups (continued)
Command Group Description
2CSPC4.XModular-SWUM200.book Page 76 Thursday, March 10, 2011 11:18 AM