Dell POWEREDGE M1000E - Manual (Page 1180)

1180 OSPFv3 Commands
Syntax
router-id router-id
• router-id — Router OSPF identifier. (Range: 0-4294967295)
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets a 4-digit dotted-decimal number identifying the
Router OSPF ID as 2.3.4.5.
console(config)#ipv6 router ospf
console(config-rtr)#router-id 2.3.4.5
show ipv6 ospf
Use the show ipv6 ospf command in Privileged EXEC mode to display
information relevant to the OSPF router.
Syntax
show ipv6 ospf [ area-id ]
area-id — Identifier for the OSPF area being displayed.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode.
2CSPC4.XModular-SWUM200.book Page 1180 Thursday, March 10, 2011 11:18 AM