Dell POWEREDGE M1000E - Manual (Page 303)

Data Center Bridging Commands 303
9
Data Center Bridging Commands
NOTE: Data Center Bridging commands are only supported on the PCM8024-k
switch. CLI commands and Dell OpenManage Switch Administrator pages are not
available for other switch models.
This chapter explains the following commands:
clear priority-flow-control statistics
Use the clear priority-flow-control statistics command to clear all or
interface Priority-Flow-Control statistics.
Syntax
clear priority-flow-control statistics [ethernet interface | port-channel port-
channel-number]
• interface — A valid Ethernet port.
• port-channel-number — A valid port-channel index.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example #1
console#clear priority-flow-control statistics
ethernet 1/xg1
clear priority-flow-control statistics priority-flow-control priority
datacenter-bridging show interfaces datacenter-bridging
priority-flow-control mode on
2CSPC4.XModular-SWUM200.book Page 303 Thursday, March 10, 2011 11:18 AM