Dell POWEREDGE M1000E - Manual (Page 1485)

SNMP Commands 1481
show trapflags
Use the show trapflags command in Privileged EXEC mode to display SNMP
traps globally or to display specific SNMP traps.
Syntax
show trapflags [acl | auto-copy-sw | captive-portal cp-type | dot1q | dvrmp |
link | maclock | multiple-users | ospf ospftype | ospfv3 ospfv3type | pim |
poe | snmp authentication | spanning-tree |stack | vrrp]
Syntax Description
Show trapflags with no other arguments shows the trap status for all
components. Use the more specific form to display the trap status for an
individual component. Only one component argument may be given.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
console#show trapflags
Authentication Flag.................Enable
Link Up/Down Flag...................Enable
Multiple Users Flag.................Enable
Spanning Tree Flag..................Enable
ACL ................................Enable
Dot1q.............................. Enable
VRRP .............................. Enable
2CSPC4.XModular-SWUM200.book Page 1481 Thursday, March 10, 2011 11:18 AM