Command mode, User guidelines, Example – Dell POWEREDGE M1000E User Manual
Page 410: Ethernet cfm cc level, Syntax, Parameter description
410
Ethernet CFM Commands
Command Mode
Maintenance domain config mode
User Guidelines
This command has no user guidelines.
Example
console(config-cfm-mdomain)#service serv1 vlan 10
ethernet cfm cc level
Use the ethernet cfm cc level command in Global Configuration mode to
initiate sending continuity checks (CCMs) at the specified interval and level
on a VLAN monitored by an existing domain. Use the no form of the
command to cease send CCMs.
Syntax
ethernet cfm cc level
0-7
vlan
vlan-list
interval
secs
Parameter Description
Parameter
Description
Range
Default
Access
Maintenance
association
VLAN ID
VLAN ID
representing a
service instance
that is
monitored by
this
maintenance
association.
1-4093
0
Read-write
CCM Interval Time interval
between
successive
transmissions
of CCM.
1, 10, 60, and 600
seconds
1 second
Read-write
2CSPC4.XModular-SWUM200.book Page 410 Thursday, March 10, 2011 11:18 AM