Dell POWEREDGE M1000E - Manual (Page 1480)

1476 SNMP Commands
show snmp filters
Use the show snmp filters command in Privileged EXEC mode to display the
configuration of filters.
Syntax
show snmp filters filtername
• filtername — Specifies the name of the filter. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following examples display the configuration of filters with and without a
filter name specification.
console # show snmp filters
Name OID Tree Type
------------------- ----------------------------------
user-filter1 1.3.6.1.2.1.1 Included
user-filter1 1.3.6.1.2.1.1.7 Excluded
user-filter2 1.3.6.1.2.1.2.2.1.*.1 Included
console # show snmp filters user-filter1
Name OID Tree Type
------------------- ----------------------------------
2CSPC4.XModular-SWUM200.book Page 1476 Thursday, March 10, 2011 11:18 AM