Dell POWEREDGE M1000E - Manual (Page 413)

Ethernet CFM Commands 413
User Guidelines
The maintenance domain must exist for it to be enabled.
Example
The following example enables a maintenance endpoint at level 1 with mpid
1010 on vlan 10.
console(config-if-Gi1/0/3)#ethernet cfm mep enable
level 1 vlan 10 mpid 1010
ethernet cfm mep active
Use the ethernet cfm mep active command in Interface Configuration mode
to activate a MEP at the specified level and direction. Use the no form of the
command to deactivate the MEP.
Syntax
ethernet cfm mep active level 0-7 vlan 1-4093 mpid 1-8191
Parameter Description
Default Configuration
No MEPs are preconfigured.
Command Mode
Interface Configuration
User Guidelines
This command has no user guidelines.
Parameter Description
level Maintenance association level
mpid Maintenance entity identifier
vlan VLAN on which the MEP operates
2CSPC4.XModular-SWUM200.book Page 413 Thursday, March 10, 2011 11:18 AM