Dell POWEREDGE M1000E - Manual (Page 1460)

1456 Serviceability Tracing Packet Commands
debug ospfv3
Use the debug ospfv3 command to enable tracing of OSPFv3 packets
received and transmitted by the switch. Use the “no” form of this command
to disable tracing of OSPFv3 packets.
Syntax
debug ospfv3 packet
no debug ospfv3 packet
Default Configuration
Display of OSPFv3 traces is disabled by default.
Command Mode
Privileged EXEC mode.
Usage Guidelines
There are no usage guidelines for this command.
Example
console#debug ospfv3 packet
debug ping
Use the debug ping command to enable tracing of ICMP echo requests and
responses. This command traces pings on the network port and on the
routing interfaces. Use the “no” form of this command to disable tracing of
ICMP echo requests and responses.
Syntax
debug ping packet
no debug ping packet
Default Configuration
Display of ICMP echo traces is disabled by default.
2CSPC4.XModular-SWUM200.book Page 1456 Thursday, March 10, 2011 11:18 AM