Dell POWEREDGE M1000E - Manual (Page 1504)

1500 SNMP Commands
• port — UDP port of the host to use. The default is 162. (Range: 1-65535.)
• filtername — A string that is the name of the filter that define the filter for
this host. If unspecified, does not filter anything. (Range: 1-30 characters.)
Default Configuration
Default configuration is 3 retries and 15 seconds timeout.
Command Mode
Global Configuration mode
User Guidelines
The username can include any printable characters except a double quote or
question mark. Enclose the string in double quotes to include spaces within
the key. The surrounding quotes are not used as part of the key. The CLI does
not filter illegal characters but may accept entries up to the first illegal
character or reject the entry entirely.
Example
The following example identifies an SNMPv3 host.
console(config)# snmp-server v3-host 192.168.0.20
The following example shows the syntax of the no snmp-server host ip-
address command.
console(config)#no snmp-server host 1.2.3.4 ?
informs Sends SNMP informs to this host.
traps Sends SNMP traps to this host.
2CSPC4.XModular-SWUM200.book Page 1500 Thursday, March 10, 2011 11:18 AM