Show port protocol, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual
Page 734: Command mode, User guidelines, Example
734
VLAN Commands
2922
Community A1
untagged
Static
show port protocol
Use the show port protocol command in Privileged EXEC mode to display
the Protocol-Based VLAN information for either the entire system or for the
indicated group.
Syntax
show port protocol {
groupid
| all}
•
groupid
— The protocol-based VLAN group ID, which is automatically
generated when you create a protocol-based VLAN group with the
vlan
protocol group command.
•
all — Enter all to show all interfaces.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the Protocol-Based VLAN information for
either the entire system.
console#show port protocol all
Group
Group Name
ID
Protocol(s
VLAN
Interface(s)
---------------
-----
----------
----
------------
test
1
IP
1
1/0/1
2CSPC4.XModular-SWUM200.book Page 734 Thursday, March 10, 2011 11:18 AM