Show dot1x statistics, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual
Page 787: Command mode, User guidelines, Example
802.1x Commands
787
VLAN Assigned..................................
Supplicant Timeout............................. 30
Guest-vlan Timeout............................. 30
Server Timeout (secs).......................... 30
MAB mode (configured)..........................
Disabled
MAB mode (operational).........................
Disabled
Authenticator PAE State........................
Initialize
Backend Authentication State...................
Initialize
show dot1x statistics
Use the show dot1x statistics command in Privileged EXEC mode to display
802.1x statistics for the specified interface.
Syntax
show dot1x statistics {gigabitethernet
unit/slot/port
|
tengigabitethernet
unit/slot/port
}
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays 802.1x statistics for the specified interface.
2CSPC4.XModular-SWUM200.book Page 787 Thursday, March 10, 2011 11:18 AM