Dell POWEREDGE M1000E - Manual (Page 1474)

1470 Sflow Commands
Poller Receiver Poller
Data Source Index Interval
----------- ------- -------
1/0/1 1 0
show sflow sampling
Use the show sflow sampling command to display the sFlow sampling
instances created on the switch.
Syntax
show sflow rcvr-index sampling [{gigabitethernet | tengigabitethernet}
interface-list ]
• rcvr-index — The sFlow Receiver associated with the poller (Range: 1–8).
• interface-list — The list of interfaces on which data is sampled.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
The following fields are displayed:
Sampler Data
Source
The sFlowDataSource (unit/slot/port) for this sFlow sampler.
This agent will support Physical ports only.
Receiver Index The sFlowReceiver configured for this sFlow sampler.
Packet Sampling
Rate
The statistical sampling rate for packet sampling from this
source.
Max Header Size The maximum number of bytes that should be copied from a
sampled packet to form a flow sample.
2CSPC4.XModular-SWUM200.book Page 1470 Thursday, March 10, 2011 11:18 AM