Dell POWEREDGE M1000E - Manual (Page 360)

360 Email Alerting Commands
Default Configuration
The default severity level is info(6).
Command Mode
Global Configuration mode
User Guidelines
You can filter log messages that appear in the buffered log by severity level.
You can specify the severity level of log messages that are emailed. You can
use this command to specify the severity level at which SNMP traps are
logged, and thus control whether traps appear in the buffered log or are
emailed and, if they are emailed, whether traps are considered urgent or non-
urgent.
logging email message-type to-addr
Use the logging email message-type to-addr command in Global
Configuration mode to configure the To address field of the email. The
message types supported now are urgent, non-urgent, and both. For each
supported severity level, multiple email addresses can be configured. For
example, for urgent type of messages, there could be multiple addresses
configured.
Syntax
logging email message-type {urgent | non-urgent | both} to-addr to-email-
addr
no logging email to-addr to-addr message-type
no logging email message-type {urgent | non-urgent | both} to-addr to-
email-addr
Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
2CSPC4.XModular-SWUM200.book Page 360 Thursday, March 10, 2011 11:18 AM