Dell POWEREDGE M1000E - Manual (Page 1481)

SNMP Commands 1477
user-filter1 1.3.6.1.2.1.1 Included
user-filter1 1.3.6.1.2.1.1.7 Excluded
show snmp group
Use the show snmp group command in Privileged EXEC mode to display the
configuration of groups.
Syntax
show snmp group [ groupname ]
• groupname — Specifies the name of the group. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
The group name accepts any printable characters except a double quote or
question mark. Enclose the string in double quotes to include spaces within
the name. The surrounding quotes are not used as part of the name. The CLI
does not filter illegal characters and may accept entries up to the first illegal
character or reject the entry entirely.
Example
The following examples display the configuration of views.
console# show snmp group
Name Security Views
Model Level Read Write Notify
----------------- ----- ------ -------- -------- --
----
user-group V3 Auth-Priv Default "" ""
2CSPC4.XModular-SWUM200.book Page 1477 Thursday, March 10, 2011 11:18 AM