Dell POWEREDGE M1000E - Manual (Page 1456)

1452 Serviceability Tracing Packet Commands
Default Configuration
Display of PIMDMv6 traces is disabled by default.
Command Mode
Privileged EXEC mode.
Usage Guidelines
There are no usage guidelines for this command.
Example
console#debug ipv6 pimdm packet
debug ipv6 pimsm
Use the debug ipv6 pimsm command to trace PIMSMv6 packet reception
and transmission. The receive option traces only received PIMSMv6 packets
and the transmit option traces only transmitted PIMSMv6 packets. When
neither keyword is used in the command, then all PIMSMv6 packet traces are
dumped. Vital information such as source address, destination address,
control packet type, packet length, and the interface on which the packet is
received or transmitted is displayed on the console. Use the “no” form of this
command to disable PIMSMv6 tracing.
Syntax
debug ipv6 pimsm packet [ receive | transmit ]
no debug ipv6 pimsm packet [ receive | transmit ]
Default Configuration
Display of PIMSMv6 traces is disabled by default.
Command Mode
Privileged EXEC mode.
Usage Guidelines
There are no usage guidelines for this command.
2CSPC4.XModular-SWUM200.book Page 1452 Thursday, March 10, 2011 11:18 AM