Dell POWEREDGE M1000E - Manual (Page 1502)

1498 SNMP Commands
• view-name — Specifies the label for the view record that is being created
or updated. The name is used to reference the record. (Range: 1-30
characters.)
• oid-tree — Specifies the object identifier of the ASN.1 subtree to be
included or excluded from the view. To identify the subtree, specify a text
string consisting of numbers, such as 1.3.6.2.4, or a word, such as
system
. Replace a single subidentifier with the asterisk (*) wildcard to
specify a subtree family; for example 1.3.*.4.
• included — Indicates that the view type is included.
• excluded — Indicates that the view type is excluded.
Default Configuration
A view entry does not exist.
Command Mode
Global Configuration mode
User Guidelines
This command can be entered multiple times for the same view record.
The view name accepts any printable characters except a double quote or
question mark. Enclose the string in double quotes to include spaces within
the name. The surrounding quotes are not used as part of the name. The CLI
does not filter illegal combinations of characters on entry and may accept
entries up to the first illegal character or reject the entry entirely.
Examples
The following example creates a view that includes all objects in the MIB-II
system group except for sysServices (System 7) and all objects for interface 1
in the MIB-II interface group.
console(config)# snmp-server view user-view system
included
console(config)# snmp-server view user-view system.7
excluded
2CSPC4.XModular-SWUM200.book Page 1498 Thursday, March 10, 2011 11:18 AM