Command mode, User guidelines, Example – Dell POWEREDGE M1000E User Manual
Page 329: Ip dhcp snooping database, Syntax, Parameter description, Default configuration, Configuration mode
DHCP Snooping Commands
329
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip dhcp snooping binding
00:00:00:00:00:01 vlan 10 10.131.12.134 interface
1/0/1
ip dhcp snooping database
Use the ip dhcp snooping database command to configure the persistent
storage location of the DHCP snooping database. This can be local to the
switch or on a remote machine.
Syntax
ip dhcp snooping database { local | tftp://
hostIP
/
filename
}
Parameter Description
Default Configuration
The database is stored locally by default.
Configuration Mode
Global Configuration mode.
Parameter
Description
hostIP
The IP address of the remote host.
filename
The name of the file for the database on the remote host. The
filename may contain any printable character and is checked
only when attempting to open the file.
2CSPC4.XModular-SWUM200.book Page 329 Thursday, March 10, 2011 11:18 AM