Syntax, Default configuration, Command mode – Dell POWEREDGE M1000E User Manual
Page 284: User guidelines, Examples
Advertising
284
Address Table Commands
Syntax
show ports security addresses {gigabitethernet
unit/slot/port
| port-channel
port-channel-number
| tengigabitethernet
unit/slot/port
}
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Examples
The following example displays dynamic addresses for port channel number
1/0/1.
console#show ports security addresses gigabitethernet
1/0/1
Dynamic addresses: 83
Maximum addresses: 100
Learned addresses
------- ---------
2CSPC4.XModular-SWUM200.book Page 284 Thursday, March 10, 2011 11:18 AM
Advertising