Dell POWEREDGE M1000E - Manual (Page 651)

QoS Commands 651
1/0/5 Down DELL
1/0/6 Down DELL
1/0/7 Down DELL
1/0/8 Down DELL
1/0/9 Down DELL
1/0/10 Down DELL
traffic-shape
Use the traffic-shape command in Global Configuration mode and Interface
Configuration mode to specify the maximum transmission bandwidth limit
for the interface as a whole. This process, also known as rate shaping , has the
effect of smoothing temporary traffic bursts over time so that the transmitted
traffic rate is bounded. To restore the default interface shaping rate value, use
the no form of this command.
Syntax
traffic-shape bw kbps
no traffic-shape
• bw — Maximum transmission bandwidth value expressed in Kbps.
(Range: 64 - 4294967295)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
Interface Configuration (gigabitethernet, port-channel, tengigabitethernet)
mode
User Guidelines
This command has no user guidelines.
2CSPC4.XModular-SWUM200.book Page 651 Thursday, March 10, 2011 11:18 AM