Dell POWEREDGE M1000E User Manual

Page 175

Advertising
background image

Using the CLI

175

Management Access List — Contains commands to define management

access administration lists. The Global Configuration mode command

management access-list is used to enter the Management Access List

configuration mode.

Policy-map — Use the policy-map command to access the QoS policy

map configuration mode to configure the QoS policy map.

Policy Class — Use the class command to access the QoS Policy-class

mode to attach or remove a diffserv class from a policy and to configure

the QoS policy class.

Class-Map — This mode consists of class creation/deletion and matching

commands. The class matching commands specify layer 2, layer 3 and

general match criteria. Use the

class-map class-map-name commands to

access the QoS Class Map Configuration mode to configure QoS class

maps.

Stack — Use the stack command to access the Stack Configuration Mode.

Ethernet — Contains commands to manage Ethernet port configuration.

The Global Configuration mode command

interface enters the Interface

Configuration mode to configure an Ethernet interface.

Port Channel — Contains commands to configure port-channels, i.e.,

assigning ports to a port-channel. Most of these commands are the same as

the commands in the Ethernet interface mode and are used to manage the

member ports as a single entity. The Global Configuration mode

command

interface port-channel

port-channel-number

is used to enter

the Port Channel mode.

Tunnel — Contains commands to manage tunnel interfaces. The Global

Configuration mode command

interface tunnel enters the Tunnel

Configuration mode to configure an tunnel type interface.

Loopback — Contains commands to manage loopback interfaces. The

Global Configuration mode command interface loopback enters the

Loopback Configuration mode to configure an loopback type interface.

SSH Public Key-chain — Contains commands to manually specify other

switch SSH public keys. The Global Configuration mode command

crypto

key pub-key chain ssh is used to enter the SSH Public Key-chain

configuration mode.

2CSPC4.XModular-SWUM200.book Page 175 Thursday, March 10, 2011 11:18 AM

Advertising