Show management access-list, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual
Page 1390: Command mode, User guidelines, Example
Advertising
1386
Management ACL Commands
show management access-list
Use the show management access-list command in Privileged EXEC mode to
display management access-lists.
Syntax
show management access-list [
name
]
•
name
— A valid access list name. (Range: 1–32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the active management access-list.
console# show management access-list
mlist
-----
permit priority 1 gigabitethernet 1/0/1
permit priority 2 gigabitethernet 2/0/1
! (Note: all other access implicitly denied)
2CSPC4.XModular-SWUM200.book Page 1386 Thursday, March 10, 2011 11:18 AM
Advertising