Dell POWEREDGE M1000E - Manual (Page 614)

614 QoS Commands
mark ip-precedence
Use the mark ip-precedence command in Policy-Class-Map Configuration
mode to mark all packets for the associated traffic stream with the specified
IP precedence value.
Syntax
mark ip-precedence prec-value
• prec-value — Specifies the IP precedence value as an integer. (Range: 0–7)
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines.
This command has no user guidelines.
Example
The following example displays
console(config)#policy-map p1 in
console(config-policy-map)#class c1
console(config-policy-classmap)#mark ip-precedence 2
console(config-policy-classmap)#
match class-map
Use the match class-map command to add to the specified class definition
the set of match conditions defined for another class. Use the no form of this
command to remove from the specified class definition the set of match
conditions defined for another class.
2CSPC4.XModular-SWUM200.book Page 614 Thursday, March 10, 2011 11:18 AM