Dell POWEREDGE M1000E - Manual (Page 494)

494 IPv6 MLD Snooping Commands
User Guidelines
There are no user guidelines for this command.
Example
console(config-vlan)#ipv6 mld snooping 1
show ipv6 mld snooping
The show ipv6 mld snooping command displays MLD Snooping
information. Configured information is displayed whether or not MLD
Snooping is enabled.
Syntax
show ipv6 mld snooping [interface {{gigabitethernet unit/slot/port | port-
channel port-channel-number | tengigabitethernet unit/slot/port }} | vlan
vlan-id }]
Default Configuration
This command has no default configuration
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
With no optional arguments, the command displays the following
information:
• Admin Mode — Indicates whether or not MLD Snooping is active on the
switch.
• Interfaces Enabled for MLD Snooping — Interfaces on which MLD
Snooping is enabled.
• MLD Control Frame Count — This displays the number of MLD control
frames that are processed by the CPU.
2CSPC4.XModular-SWUM200.book Page 494 Thursday, March 10, 2011 11:18 AM