Dell POWEREDGE M1000E - Manual (Page 571)

Port Aggregator Commands 571
speed
Use the speed command in port aggregator configuration mode to configure
the speed of all member ports in the aggregator group/zone. To restore the
default, use the no form of this command.
Syntax
speed [10 | 100 ]
no speed
• 10 — Configures the port to 10 Mbps operation.
• 100 — Configures the port to 100 Mbps operation.
Default Configuration
This command has no default configuration.
Command Mode
Port Aggregator mode
User Guidelines
This command has no user guidelines.
Example
console(config)#port-aggregator group 1
console(config-aggregator-1)#speed 100
console(config-aggregator-1)#
2CSPC4.XModular-SWUM200.book Page 571 Thursday, March 10, 2011 11:18 AM