Syntax, Parameter description, Default configuration – Dell POWEREDGE M1000E User Manual
Page 415: Command mode, User guidelines, Example, Ping ethernet cfm
Advertising
Ethernet CFM Commands
415
Syntax
ethernet cfm mip level
0-7
Parameter Description
Default Configuration
No MIPs are preconfigured.
Command Mode
Interface Configuration
User Guidelines
This command has no user guidelines.
Example
console(config-if-gi1/0/1)# ethernet cfm mip level <7>
ping ethernet cfm
Use the ping ethernet cfm command in Privileged EXEC mode to generate a
loopback message (LBM) from the configured MEP.
Syntax
ping ethernet cfm {mac
mac-addr
| remote-mpid
1-8191
} {domain
domain
name
| level
0-7
} vlan
vlan-id
mpid
1-8191
[count
1-255
]
Parameter Description
Parameter
Description
level
Maintenance association level
Parameter
Description
level
Maintenance association level
2CSPC4.XModular-SWUM200.book Page 415 Thursday, March 10, 2011 11:18 AM
Advertising