Dell POWEREDGE M1000E - Manual (Page 1572)

1568 System Management Commands
User Guidelines
The switch SID is used when pre-configuring switches in a stack using the
member command in config-stack mode.
Example
The following example displays the information for supported switch types.
console>show supported switchtype
Mgmt Code
SID Switch Model ID Pref Type
----------------------------------------------------------
1 PCM8024 0x100b000
The following table describes the fields in the example.
The following example displays the format of the show supported switchtype
[ switchindex ] command.
console#show supported switchtype 1
Switch Type....................... 0x73950001
Model Identifier.................. PCM8024
Switch Description................ PowerConnect M8024
Management Preference............. 1
Field Description
Switch Index (SID) This field displays the index into the database of
supported switch types. This index is used when
preconfiguring a member to be added to the
stack.
Model Identifier This field displays the model identifier for the
supported switch type.
Management Preference This field indicates the management preference
value of the switch type.
Code Version This field displays the code load target identifier
of the switch type.
2CSPC4.XModular-SWUM200.book Page 1568 Thursday, March 10, 2011 11:18 AM