Parameter description, Default configuration, Command mode – Dell POWEREDGE M1000E User Manual

Page 265: User guidelines, Example, Mac address-table multicast forward-all, Syntax, Mac address-table, Multicast forward-all

Advertising
background image

Address Table Commands

265

Parameter Description

Default Configuration

The default for this command is not forbidden.

Command Mode

Global configuration mode

User Guidelines

This command has no user guidelines.

Example

The following example forbids forwarding unregistered multicast addresses

on VLAN8.

console(config)#mac address-table multicast forbidden

forward-unregistered vlan 8

mac address-table multicast forward-all

Use the mac address-table multicast forward-all command in Interface

Configuration mode to enable forwarding of all Multicast packets. To restore

the default, use the no form of the mac address-table multicast forward-all

command.

Syntax

mac address-table multicast forward-all vlan

vlan-id

no mac address-table multicast forward-all vlan

vlan-id

Parameter Description

Parameter

Description

vlan

vlan-id

Valid VLAN ID (Range 1-4093).

Parameter

Description

vlan

vlan-id

A valid VLAN ID (Range 1-4093).

2CSPC4.XModular-SWUM200.book Page 265 Thursday, March 10, 2011 11:18 AM

Advertising