Dell POWEREDGE M1000E - Manual (Page 794)

794 802.1x Commands
VLAN Vlan
--------- --------- ---------------
1/0/1 Disabled Disabled
1/0/2 10 20
1/0/3 Disabled Disabled
1/0/4 Disabled Disabled
1/0/5 Disabled Disabled
1/0/6 Disabled Disabled
console#show dot1x advanced gigabitethernet 1/0/2
Port Guest Unauthenticated
VLAN Vlan
--------- --------- ---------------
1/0/2 10 20
802.1x Option 81
radius-server attribute 4
Use the radius-server attribute 4 command in Global Configuration mode to
set the network access server (NAS) IP address for the RADIUS server. Use
the no version of the command to set the value to the default.
Syntax
radius-server attribute 4 ip-address
no dot1x guest-vlan
• ip-address — Specifies the IP address to be used as the RADIUS attribute
4, the NAS IP address.
2CSPC4.XModular-SWUM200.book Page 794 Thursday, March 10, 2011 11:18 AM