Gmrp commands – Dell POWEREDGE M1000E User Manual

Page 869

Advertising
background image

GMRP Commands

869

44

GMRP Commands

The GARP Multicast Registration Protocol provides a mechanism that allows

networking devices to dynamically register (and de-register) Group

membership information with the MAC networking devices attached to the

same segment, and for that information to be disseminated across all

networking devices in the bridged LAN that support Extended Filtering

Services. The operation of GMRP relies upon the services provided by the

Generic Attribute Registration Protocol (GARP). GMRP is supported as

described below.
The information registered, de-registered and disseminated via GMRP is in

the following forms:

1 Group Membership information: This indicates that there exists one or

more GMRP participants which are members of a particular Group, and

carry the group MAC addresses associated with the Group.

2 Group service requirements information: This indicates that one or more

GMRP participants require Forward all Groups or Forward Unregistered to

be the default filtering behavior.

NOTE: The Group Service requirement is not supported.

Registration of group membership information allow networking devices to

be made aware that frames destined for that group MAC address concerned

should be forwarded in the direction of registered members of the group.

Forwarding of frames destined for that group MAC address occur on ports on

which such membership registration has been received.
Registration of group services requirement information allow networking

devices to be made aware that any of their ports that can forward frames in

the direction from which the group service requirement information has been

received should modify their default group behavior in accordance with the

group service requirement expressed.

NOTE: The Group Service requirement is not supported.

2CSPC4.XModular-SWUM200.book Page 869 Thursday, March 10, 2011 11:18 AM

Advertising