Show ipv6 pimsm bsr, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual
Page 1059: Command mode, User guidelines, Example
IPv6 Multicast Commands
1059
Group Address/Prefix Length
---------------------------------------
FF1E::/64
PIM-SM INTERFACE STATUS
Interface Interface-Mode Operational-Status
--------- -------------- ----------------
vlan 3 Enabled Operational
vlan 6 Enabled Operational
vlan 9 Enabled Operational
show ipv6 pimsm bsr
Use the show ipv6 pimsm bsr command to display the bootstrap router (BSR)
information. The output includes elected BSR information and information
about the locally configured candidate rendezvous point (RP) advertisement.
Syntax
show ipv6 pimsm bsr
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pimsm bsr
2CSPC4.XModular-SWUM200.book Page 1059 Thursday, March 10, 2011 11:18 AM