Dell POWEREDGE M1000E - Manual (Page 1050)

1050 IPv6 Multicast Commands
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 pimsm
ipv6 pimsm (VLAN Interface config)
Use the ipv6 pimsm command in VLAN Interface configuration mode to
administratively enable PIM-SM multicast routing mode on a particular IPv6
router interface. Use the "no" form of this command to disable PIM SM on an
interface.
Syntax
ipv6 pimsm
no ipv6 pimsm
Default Configuration
PIM-SM is disabled by default.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 pimsm
ipv6 pimsm bsr-border
Use the ipv6 pimsm bsr-border command to prevent bootstrap router (BSR)
messages from being sent or received through an interface. Use the "no" form
of this command to disable the interface from being the BSR border.
2CSPC4.XModular-SWUM200.book Page 1050 Thursday, March 10, 2011 11:18 AM