Dell POWEREDGE M1000E - Manual (Page 820)

820 DHCP Server and Relay Agent Commands
no default-router
Parameter Description
Default Configuration
No default router is configured.
Command Mode
DHCP Pool Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config-dhcp-pool)#default-router 192.168.22.1
192.168.23.1
dns-server (IP DHCP Pool Config)
Use the dns-server command in IP DHCP Pool Configuration mode to set
the IP DNS server address which is provided to a DHCP client by the DHCP
server. DNS server address is configured for stateless server support.
Syntax
dns-server ip-address1
no dns-server
Parameter Description
ip-address1 The IPv4 address of the first default router for the DHCP
client.
ip-address2 The IPv4 address of the second default router for the DHCP
client.
2CSPC4.XModular-SWUM200.book Page 820 Thursday, March 10, 2011 11:18 AM