Dell POWEREDGE M1000E - Manual (Page 476)

476 IP Addressing Commands
Address Conflict Detection Status..No Conflict Detected
show ip helper-address
Use the show ip helper-address command in Privileged EXEC mode to
display IP helper addresses configuration.
Syntax
show ip helper-address [ intf-address ]
• intf-address — IP address of a routing interface. (Range: Any valid IP
address)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
console#show ip helper-address
IP helper is enabled
Interface UDP Port Discard Hit Count Server
Address
-------------------- ----------- ---------- ---------- ------------
------
vlan 25 domain No 0 192.168.40.2
vlan 25 dhcp No 0 192.168.40.2
vlan 30 dhcp Yes 0
vlan 30 162 No 0 192.168.23.1
Any dhcp No 0 192.168.40.1
2CSPC4.XModular-SWUM200.book Page 476 Thursday, March 10, 2011 11:18 AM