Boot host autoreboot, Syntax, Parameter description – Dell POWEREDGE M1000E User Manual
Page 1266: Default configuration, Command mode, User guidelines, Example
1264
Auto-Install Commands
boot host autoreboot
Use the boot host autoreboot command in Global Configuration mode to
enable rebooting the device (no administrative intervention) when the auto-
image is successfully downloaded. Use the no form of this command to
disable rebooting the device (no administrative intervention) when the auto-
image is successfully downloaded.
Syntax
boot host autoreboot
no boot host autoreboot
Parameter Description
This command does not require a parameter description.
Default Configuration
The default value is enabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines
Example
console#
console#configure
console(config)#boot host autoreboot
console(config)#no boot host autoreboot
2CSPC4.XModular-SWUM200.book Page 1264 Thursday, March 10, 2011 11:18 AM