Dell POWEREDGE M1000E - Manual (Page 382)

382 Ethernet Configuration Commands
show interfaces counters
Use the show interfaces counters command in User EXEC mode to display
traffic seen by the interface. Use the command in either User EXEC mode or
Privileged EXEC mode to display Priority Flow Control (PFC) traffic seen by
the interface, including Received PFC Frames and Transmitted PFC Frames
for a given ethernet or port-channel interface.
Syntax
show interfaces counters [gigabitethernet unit/slot/port | port-channel port-
channel-number | tengigabitethernet unit/slot/port ]
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode and Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays traffic seen by the physical interface:
console>show interfaces counters
Port InOctets InUcastPkts
---- ---------- ---------
1/0/1 183892 1289
3/0/1 123899 1788
Port OutOctets OutUcastPkts
---- ---------- ---------
1/0/1 9188 9
2CSPC4.XModular-SWUM200.book Page 382 Thursday, March 10, 2011 11:18 AM