Dell POWEREDGE M1000E - Manual (Page 1542)

1538 System Management Commands
When the MOTD banner is executed, the following displays:
IMPORTANT: There is a power shutdown at 23:00hrs
today, duration 1 hr 30 minutes.
Press ‘y’ to continue
If ‘y’ is entered, the following displays:
console >
If ‘n’ is entered, the session will get disconnected, unless it is a serial
connection.
clear checkpoint statistics
Use the clear checkpoint statistics command to clear the statistics for the
checkpointing process.
Syntax
clear checkpoint statistics
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
When nonstop forwarding is enabled on a stack, the stack's management unit
checkpoints operational data to the backup unit. If the backup unit takes over
as the management unit, the control plane on the new management unit uses
the checkpoint data when initializing its state. Checkpoint statistics track the
amount of data checkpointed from the management unit to the backup unit.
Example
console#clear checkpoint statistics
2CSPC4.XModular-SWUM200.book Page 1538 Thursday, March 10, 2011 11:18 AM