Commands in this chapter, Syntax, Parameter description – Dell POWEREDGE M1000E User Manual
Page 550: Default configuration, Command mode, User guidelines
Advertising
550
Multicast VLAN Registration Commands
Commands in this Chapter
This chapter explains the following commands:
mvr
Use the mvr command in Global Config and Interface Config modes to
enable MVR. Use the no form of this command to disable MVR.
Syntax
mvr
no mvr
Parameter Description
This command does not require a parameter description.
Default Configuration
The default value is Disabled.
Command Mode
Global Config, Interface Config
User Guidelines
MVR can only be configured on physical interfaces.
2CSPC4.XModular-SWUM200.book Page 550 Thursday, March 10, 2011 11:18 AM
Advertising