Dell POWEREDGE M1000E - Manual (Page 228)

228 AAA Commands
Command Mode
Global Configuration mode
User Guidelines
The additional methods of authentication are used only if the previous
method returns an error, not if it fails. To ensure that the authentication
succeeds even if all methods return an error, specify none as the final method
in the command line. For example, if none is specified as an authentication
method after radius, no authentication is used if the RADIUS server is down.
Example
The following example configures the http authentication.
console(config)# ip http authentication radius local
ip https authentication
Use the ip https authentication command in Global Configuration mode to
specify authentication methods for https server users. To return to the default
configuration, use the no form of this command.
Syntax
ip https authentication method1 [ method2 ...]
no ip https authentication
Parameter Description
method1 [ method2 ...] — Specify at least one from the following table:
Keyword Source or destination
local Uses the local username database for authentication.
none Uses no authentication.
radius Uses the list of all RADIUS servers for authentication.
tacacs Uses the list of all TACACS+ servers for authentication.
2CSPC4.XModular-SWUM200.book Page 228 Thursday, March 10, 2011 11:18 AM