Dell POWEREDGE M1000E - Manual (Page 1326)

1324 Clock Commands
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the device to accept Simple Network Time
Protocol (SNTP) traffic from the server at IP address 192.1.1.1.
console(config)# sntp server 192.1.1.1
sntp trusted-key
Use the sntp trusted-key command in Global Configuration mode to
authenticate the identity of a system to which Simple Network Time Protocol
(SNTP) will synchronize. To disable authentication of the identity of the
system, use the no form of this command.
Syntax
sntp trusted-key key-number
no sntp trusted-key key-number
• key-number — Key number of authentication key to be trusted. (Range:
1–4294967295)
Default Configuration
No keys are trusted.
Command Mode
Global Configuration mode
2CSPC4.XModular-SWUM200.book Page 1324 Thursday, March 10, 2011 11:18 AM