Dell POWEREDGE M1000E - Manual (Page 1292)

1290 Captive Portal Commands
Captive Portal Interface Commands
show captive-portal interface configuration
status
Use the show captive-portal interface configuration status command to
display the interface to configuration assignments for all captive portal
configurations or for a specific configuration.
Syntax
show captive-portal interface configuration [ cp-id ] status
• cp-id —Captive Portal ID.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal interface configuration status
CP ID CP Name Interface Interface Description Type
----- ------------------ --------- ----------------------------------- -----
---
1 Default 1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit .. Physical
console#show captive-portal interface configuration 1 status
CP ID..................................... 1
CP Name................................... cp1
Interface Interface Description Type
--------- ----------------------------------- --------
1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit ... Physical
2CSPC4.XModular-SWUM200.book Page 1290 Thursday, March 10, 2011 11:18 AM