Default configuration, Command mode, User guidelines – Dell POWEREDGE M1000E User Manual
Page 645: Examples
QoS Commands
645
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
If the interface is specified, the class-of-service queue configuration of the
interface is displayed. If omitted, the most recent global configuration
settings are displayed.
Examples
The following example displays the COS configuration with no unit/slot/port
or port-channel parameter.
console#show interfaces cos-queue
Global Configuration
Interface Shaping Rate......................... 0
Queue Id
Min. Bandwidth
Scheduler Type
Queue
Management Type
--------
--------------
--------------
--------------
0
0
Weighted
Tail Drop
1
0
Weighted
Tail Drop
2
0
Weighted
Tail Drop
3
0
Weighted
Tail Drop
4
0
Weighted
Tail Drop
5
0
Weighted
Tail Drop
6
0
Weighted
Tail Drop
This example displays the COS configuration for the specified interface 1/0/1.
2CSPC4.XModular-SWUM200.book Page 645 Thursday, March 10, 2011 11:18 AM