Default configuration, Command mode, User guidelines – Dell POWEREDGE M1000E User Manual
Page 1114: Example, Router ospf, Syntax
Advertising
1114
OSPF Commands
Default Configuration
This command has no default configuration.
Command Mode
Router OSPF Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example defines the router OSPF ID as 5.5.5.5.
console(config)#router ospf
console(config-router)#router-id 5.5.5.5
router ospf
Use the router ospf command in Global Configuration mode to enter Router
OSPF mode.
Syntax
router ospf
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
The command prompt changes when the router ospf command executes.
2CSPC4.XModular-SWUM200.book Page 1114 Thursday, March 10, 2011 11:18 AM
Advertising