Dell POWEREDGE M1000E - Manual (Page 821)

DHCP Server and Relay Agent Commands 821
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
IP DHCP Pool Configuration mode
User Guidelines
This command has no user guidelines.
domain-name (IP DHCP Pool Config)
Use the domain-name command in IP DHCP Pool Configuration mode to
set the DNS domain name which is provided to a DHCP client by the DHCP
server. The DNS name is an alphanumeric string up to 255 characters in
length. Use the no form of the command to remove the domain name.
Syntax
domain-name domain
no domain-name domain
• domain — DHCP domain name. (Range: 1–255 characters)
Default Configuration
This command has no default configuration.
Command Mode
IP DHCP Pool Configuration mode
Parameter Description
ip-address1 Valid IPv4 address.
2CSPC4.XModular-SWUM200.book Page 821 Thursday, March 10, 2011 11:18 AM