Show ipv6 mld-proxy groups, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual

Page 997: Command mode, User guidelines, Show ipv6 mld, Proxy groups

Advertising
background image

IPv6 Routing Commands

997

Interface Index.............................. vlan 10

Admin Mode................................... Enabled

Operational Mode............................. Enabled

Version...................................... 3

Num of Multicast Groups...................... 0

Unsolicited Report Interval.............. 1

Querier IP Address on Proxy Interface..... fe80::1:2:5

Older Version 1 Querier Timeout.......... 00:00:00

Proxy Start Frequency.....................1

show ipv6 mld-proxy groups

Use the show ipv6 mld-proxy groups command to display information about

multicast groups that the MLD Proxy reported.

Syntax

show ipv6 mld-proxy groups

Default Configuration

There is no default configuration for this command.

Command Mode

Privileged EXEC

User Guidelines

The following parameters are displayed by this command:

Field

Description

Interface

The MLD Proxy interface.

Group Address The IP address of the multicast group.

2CSPC4.XModular-SWUM200.book Page 997 Thursday, March 10, 2011 11:18 AM

Advertising