Dell POWEREDGE M1000E - Manual (Page 256)

256 ACL Commands
Block DTP..................................Enable
Block UDLD................................ Enable
Block PAGP.................................Enable
Block SSTP................................ Enable
Block All................................. Enable
show ip access-lists
Use the show ip access-lists command in Privileged EXEC mode to display an
IP ACL and time-range parameters.
Syntax
show ip access-lists [ accesslistnumber ]
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays IP ACLs configured on a device.
console#show ip access-lists
Current number of ACLs: 2 Maximum number of ACLs: 100
Parameter Description
accesslistnumber The number used to identify the IP ACL.
2CSPC4.XModular-SWUM200.book Page 256 Thursday, March 10, 2011 11:18 AM