Show vlan association mac, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual
Page 736: Command mode, User guidelines, Example, Show vlan, Association mac
736
VLAN Commands
----- --------------- ------------- --------------
2 VLAN0002 Gi1/0/11-20 Dynamic (DOT1X)
console#show vlan id 3
VLAN Name Ports Type
----- --------------- ------------- --------------
3 VLAN0003 Gi1/0/21-24 Dynamic (GVRP)
show vlan association mac
Use the show vlan association mac command in Privileged EXEC mode to
display the VLAN associated with a specific configured MAC address. If no
MAC address is specified, the VLAN associations of all the configured MAC
addresses are displayed.
Syntax
show vlan association mac [
mac-address
]
•
mac-address
— Specifies the MAC address to be entered in the list.
(Range: Any valid MAC address)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example shows no entry in MAC address to VLAN cross-
reference.
console#show vlan association mac
2CSPC4.XModular-SWUM200.book Page 736 Thursday, March 10, 2011 11:18 AM